Skip to content
Mellif Water Transfer Pump Pro,Compatible With Makita Battery（Tool Only）

Mellif Water Transfer Pump Pro,Compatible With Makita Battery（Tool Only）

$99.99 - $99.99
$99.99
$99.99 - $99.99
$99.99

  • Makita 18V Compatible: Works with all battery sizes (battery not included).

  • Strong Output: 1/4HP brushless motor, 9 GPM flow, 60 ft lift.

  • Self-Priming: No water needed to start—just connect and go.

  • 3 Flow Rates: Choose from 540, 420, or 300 GPH.

  • LED Light: Dual brightness for day/night use.

  • Quick Hose Connect: 3/4" outlet with filter removes water down to 1/8".

  • Multi-Use: Ideal for barrels, ponds, tubs, basements, and irrigation.

Fast Shipping

Ship from local warehouse. Estimated delivery time: 2-5 days.

HASSLE-FREE WARRANTY

Get a full refund when you return your undamaged products within 30 days - for any reason. 5 Years warranty.

Specifications

Product Dimensions：14"L x 6"W x 8"H

Power Source：Battery Powered

Item Weight：5.5 Pounds

Maximum Flow Rate：9 Gallons Per Minute

Maximum Lifting Height：8 Feet

Voltage：18 Volts

FAQ

How long can this water pump run on a single charge?

Runtime depends on your battery capacity. For example:

  • 5.0Ah Milwaukee 18V battery (90Wh) and a 180W motor, expect around 25–30 minutes of continuous use.
  • 9.0Ah battery (162Wh) can provide approximately 50–55 minutes.

⚠️ Actual runtime varies with flow rate setting, water resistance, and hose setup.

Why does the pump stop running a few seconds after starting?

There are a few common reasons for this issue:

  • If the battery charge is too low, the pump may shut off automatically. Try using a fully charged battery.
  • The pump has built-in protection. If there's too much resistance (e.g. a kinked hose or blocked inlet), it will shut down to prevent damage.
  • Make sure the inlet hose is submerged and not sucking air. This pump is self-priming, but still needs water to be drawn up within a few seconds.
  • A loose suction filter or poor hose connection may prevent proper priming.

✅ Tip: Keep the inlet hose height under 8 ft and ensure all connections are airtight.

Does it need to be primed before use?

No priming needed—just connect the hose, insert the battery, and start pumping.

Is this pump compatible with Makita 18V batteries?

Yes, it works with all sizes of Makita 18V batteries (Power tool battery not included).